AirHog™ Hi-Performance Filter Cleaning Steps:
Remove Filter: Remove the filter from housing/airbox and tap lightly to remove loose dirt.
Cleaning: Place filter on a flat work surface and liberally spray both sides of the filter with cleaning solution and let soak for 10 minutes.
Rinsing: Rinse the filter with cool tap water from the clean side and allow the filter to completely dry naturally.
Oiling: Spray FRAM AirHog™ Oil onto each pleat sparingly.
Re-install Filter: Re-install the filter into the clean filter housing/airbox.
|
|
|
|
|
|
